97精品天天人人揉人人玩,AV在线播放WWW啦啦啦,亚洲va欧美va国产综合,人人曰人人做人人,成人黄色电影网址,欧美久久久久久中文字幕,欧美亚洲另类A片区,亚洲资源AV无码日韩AV无码

航空翻譯_飛行翻譯_民航翻譯_藍天飛行翻譯公司

當前位置: 主頁 > 公司新聞 > 航空翻譯 >

航空術語詞典Dictionary of Aeronautical Terms 下

時間:2011-03-11 23:18來源:藍天飛行翻譯 作者:航空 點擊:


valve-timing clearance (reciprocating engine specification). A specified clearance between the end of the valve stem and the rocker arm of an air-cooled aircraft engine equipped with solid valve lifters. The valves in one cylinder, usually cylinder number one, are adjusted to the valve-timing clearance, and the valve operating cam mechanism is adjusted so the valves in this cylinder open and close when the crankshaft is in the correct position.
After the cam mechanism is adjusted, the valves are reset to the correct cold clearance. Valve-timing clearance is also called the hot, or operating, valve clearance of the engine.
vanadium. A silvery-white, ductile, metallic chemical element. Vanadium’s symbol is V, its atomic number is 23, and its atomic weight is 50.942. Vanadium is used as an alloying element for steel to increase its hardness and toughness. Vanadium steel alloyed with chromium is used to make mechanics’ hand tools.
vane-type pump (fluid pump). A constant-displacement fluid pump that uses sliding vanes to move fluid through the pump. An eccentrically mounted shaft is turned inside a circular housing that has an intake port on one side and an outlet port on the other. Flat vanes are free to slide back and forth through slots in the shaft as it turns.
As the shaft turns, the volume of the chamber connected to the intake port increases and pulls fluid into the pump. This fluid is carried around the inside of the pump until it reaches a point connected to the outlet port. At this point, the vanes sliding through the shaft decrease the volume of the chamber, and fluid is forced out of the pump. Vane-type pumps move a comparatively large volume of fluid, but produce a relatively low pressure and are used as fuel pumps and low-pressure air pumps.
vanishing point (mechanical drawing). The point in a linear perspective drawing at which the lines forming parallel sides of an object meet. Drawings made in linear perspective cause the object to appear to have depth.
vapor. The gaseous state of a material. Water is normally a liquid, but when it evaporates, it turns into invisible water vapor. Certain metals can be turned into a vapor in the intense heat of an electric arc and the low pressure of a vacuum.
vapor-cycle air cooling system. A sealed mechanical refrigeration system used to lower the temperature of the air in an aircraft cabin. A liquid refrigerant, such as R-12 or R-134a, is sprayed into the evaporator coils, and as it evaporates, it absorbs heat from the cabin air blown across the evaporator.
The refrigerant, now in its vapor form, flows from the evaporator into a mechanical compressor where it is compressed, increasing both its temperature and pressure. The hot, high-pressure vapor flows from the compressor through the coils of a radiator-like condenser. Air from outside the aircraft blowing across the condenser coils absorbs heat from the refrigerant vapor, causing it to change back into a liquid. The liquid refrigerant now repeats its cycle through the evaporator and picks up more heat.
航空翻譯 www.pankajksingh.com
本文鏈接地址:航空術語詞典Dictionary of Aeronautical Terms 下